Vintage-character audio plug-ins for Mac
The studio sound that was out of reach. Now on your desk.
Mikrografika makes warm, characterful plug-ins for people who make records. Few controls, honest sound, and presets that are level-matched so you hear the colour, not just the volume.

First product
Ember Press
Warm character compressor
One big Drive knob that gets warmer, tighter and louder as you turn it. Tube and tape colour, a little hiss and hum that follow the music, and a limiter that keeps every peak under zero.
The story
1996
Making electronic music since
I started making electronic music in 1996: sampling records, recording whatever I could get near a microphone, producing late into the night.
The sound I chased lived in big rooms and racks of hardware I could never afford. So I learned how it worked instead: what the desks, the tape and the compressors did to a signal, and why it felt so good.
Mikrografika is where that ends up. I build the tools that used to be out of reach, and I keep them simple enough that you reach for them while the idea is still warm.
Daniel, founder
How we build
Few controls
Every knob earns its place. You should be able to get a great sound in the first ten seconds.
Level-matched
Presets come out at the same loudness they go in, so louder never fools your ears into thinking better.
Made to be heard
Built and tuned by ear on real mixes: drums, vocals, bass and full songs, not test tones.
From the notebook
Vocals · 7 min read
Mixing vocals the Motown way: plates, compression and tape
How the 1960s Detroit vocal sound was built, from close mics and quick compression to plate reverb and tape, and how to get it in any DAW tonight.
Drums · 7 min read
60s drums and saturation: what the old desks added
Valve desks, transformers, tape and four tracks: what each one did to drums in the 1960s, and how to rebuild that warm, dense sound with modern tools.
Signal chain · 8 min read
Frequency response across a vintage signal chain, from mic to tape
Why old recordings sound warm: a stage-by-stage look at how the mic, preamp, desk, compressor and tape each shaped the sound, and how to stack the same small changes yourself.
The waitlist
Hear it first, and catch the $12 launch price.
Ember Press launches at $12 before it goes to $29. Join the list and you'll know the day it's out, and when new tools come off the bench.